The HF-35 Hook Hanger is available with a 15º, 45º or 90º end section designed to accept a 1/2 inch diameter coil rod. The opposite end wraps around the flange of a steel beam with a “hook” which secures the hanger to the beam. This hook is manufactured with a tolerance of approx. 1/8″ greater than the measured flange thickness to assure a proper fit. The hook has a heavy 90º end section welded to the hook, providing additional strength. When ordering, customer must submit actual dimensions of the flange. If the flange is bigger than 14”x3” use the HF-37 hanger. When ordering, must submit actual measured beam dimensions.