The Halfen Panel Restraint Anchor – Near Edge is comprised of a hot rolled anchor and a pipe sleeve welded to a 6” low profile, high strength channel. This anchor is designed for applications where zero end clearance is required. A length of bent rebar is fitted into the pipe sleeve on the back of the anchor to help distribute loads deeply into the concrete. The anchor is supplied with the whole length of the channel foam filled to prevent concrete seepage into the channel. Attaching members for use with HT5506 is compatible with this product and can be inserted into the channel and turned 90° to lock them in place. Nail holes are provided in the channel for attaching the unit to the form. Standard length of the Anchor is 6”. Other lengths are readily available. The anchor is available in plain or hot dip galvanize finish.