2-Ton, 4-Ton and 8-Ton
The RL-24 Plate Anchor is designed with a plate welded to the bottom to provide high pullout strength with a low profile. This design makes the anchor ideal for face and back lifts of thin-wall units and stripping, handling and erection applications. The 4-ton Plate Anchor is ideal for use in the *Thermomass® 3-2-3 composite insulated panel system (see detail below). The Plate Anchor is available in the sizes shown in the table and in plain or hot dip galvanize finish.
Crisscross the lower plate of the anchor with four (4) 18” long #4 rebar as shown in the sketch.
NOTE: A minimum 3/4″ concrete cover below the anchor is required to achieve posted working loads.
NOTE: The Plate Anchor has allowable face shear loads that are equal to or greater than unreinforced face tension loads for anchors located in a panel or concrete unit at a distance of at least 2B+A from the edges.