EDOT adhesive is formulated to provide an economical and high-strength
solution for transportation projects.* It is a two component, high-solids
epoxy-based system that is a non-shrink anchor grouting material. Resin
and hardener are dispensed and mixed simultaneously through the static
mixing nozzle. EDOT meets the requirements of ASTM C-881 and AASHTO
M235 specifications for Type I, II, IV and V, Grade 3, Class C.
*Visit www.strongtie.com/dot for specific state DOT approvals.
USES:
- Threaded rod anchoring
- Rebar doweling
APPLICATION: Surfaces to receive epoxy must be clean. The base material
temperature must be 40ºF or above at the time of installation. For best
results, material should be 70ºF–80ºF at the time of application. Cartridges
should not be immersed in water to facilitate warming. To warm cold
material, the cartridges should be stored in warm, uniformly heated area or
storage container for a sufficient time to allow epoxy to warm completely.
Mixed material in nozzle can harden in 5-7 minutes at a temperature of 40ºF or above.
SHELF LIFE: 24 months from date of manufacture in unopened container.
STORAGE CONDITIONS: For best results, store between 45ºF–90ºF. To store
partially used cartridges, leave hardened nozzle in place. To re-use, attach
new nozzle.
COLOR: Resin – white, hardener – brown
When properly mixed, EDOT adhesive will be a uniform and consistent tan
color.